This tutorial explains unit testing with JUnit 4.x and JUnit5. It explains the creation of JUnit tests. It also covers the usage of the Eclipse IDE for developing software tests.
A software test is a piece of software, which executes another piece of software. It validates if that code results in the expected state (state testing) or executes the expected sequence of events (behavior testing).
Software unit tests help the developer to verify that the logic of a piece of the program is correct.
Running tests automatically helps to identify software regressions introduced by changes in the source code. Having a high test coverage of your code allows you to continue developing features without having to perform lots of manual tests.
The code which is tested is typically called the code under test. If you are testing an application, this is called the application under test.
A test fixture is a fixed state in code which is tested used as input for a test. Another way to describe this is a test precondition.
For example, a test fixture might be a a fixed string, which is used as input for a method. The test would validate if the method behaves correctly with this input.
A unit test is a piece of code written by a developer that executes a specific functionality in the code to be tested and asserts a certain behavior or state.
The percentage of code which is tested by unit tests is typically called test coverage.
A unit test targets a small unit of code, e.g., a method or a class. External dependencies should be removed from unit tests, e.g., by replacing the dependency with a test implementation or a (mock) object created by a test framework.
Unit tests are not suitable for testing complex user interface or component interaction. For this, you should develop integration tests.
An integration test aims to test the behavior of a component or the integration between a set of components. The term functional test is sometimes used as synonym for integration test. Integration tests check that the whole system works as intended, therefore they are reducing the need for intensive manual tests.
These kinds of tests allow you to translate your user stories into a test suite. The test would resemble an expected user interaction with the application.
Performance tests are used to benchmark software components repeatedly. Their purpose is to ensure that the code under test runs fast enough even if it’s under high load.
A test is a behavior test (also called interaction test) if it checks if certain methods were called with the correct input parameters. A behavior test does not validate the result of a method call.
State testing is about validating the result. Behavior testing is about testing the behavior of the application under test.
If you are testing algorithms or system functionality, in most cases you may want to test state and not interactions. A typical test setup uses mocks or stubs of related classes to abstract the interactions with these other classes away Afterwards you test the state or the behavior depending on your need.
There are several testing frameworks available for Java. The most popular ones are JUnit and TestNG
This description focuses on JUnit. It covers both JUnit 4.x and JUnit 5.
Typical, unit tests are created in a separate project or separate source folder to keep the test code separate from the real code. The standard convention from the Maven and Gradle build tools is to use:
src/main/java - for Java classes
src/test/java - for test classes
What should be tested is a highly controversial topic. Some developers believe every statement in your code should be tested.
In any case you should write software tests for the critical and complex parts of your application. If you introduce new features a solid test suite also protects you against regression in existing code.
In general it it safe to ignore trivial code. For example, it is typical useless to write tests for getter and setter methods which simply assign values to fields. Writing tests for these statements is time consuming and pointless, as you would be testing the Java virtual machine. The JVM itself already has test cases for this. If you are developing end user applications you are safe to assume that a field assignment works in Java.
If you start developing tests for an existing code base without any tests, it is good practice to start writing tests for code in which most of the errors happened in the past. This way you can focus on the critical parts of your application.
A JUnit test is a method contained in a class which is only used for testing.
This is called a Test class.
To define that a certain method is a test method, annotate it with the @Test annotation.
This method executes the code under test. You use an assert method, provided by JUnit or another assert framework, to check an expected result versus the actual result. These method calls are typically called asserts or assert statements.
You should provide meaningful messages in assert statements. That makes it easier for the user to identify and fix the problem. This is especially true if someone looks at the problem, who did not write the code under test or the test code.
The following code shows a JUnit test using the JUnit 5 version.
This test assumes that the MyClass class exists and has a multiply(int, int) method.
import static org.junit.jupiter.api.Assertions.assertEquals;
import org.junit.jupiter.api.Test;
public class MyTests {
@Test
public void multiplicationOfZeroIntegersShouldReturnZero() {
MyClass tester = new MyClass(); // MyClass is tested
// assert statements
assertEquals(0, tester.multiply(10, 0), "10 x 0 must be 0");
assertEquals(0, tester.multiply(0, 10), "0 x 10 must be 0");
assertEquals(0, tester.multiply(0, 0), "0 x 0 must be 0");
}
}There are several potential naming conventions for JUnit tests. A widely-used solution for classes is to use the "Test" suffix at the end of test classes names.
As a general rule, a test name should explain what the test does. If that is done correctly, reading the actual implementation can be avoided.
One possible convention is to use the "should" in the test method name. For example, "ordersShouldBeCreated" or "menuShouldGetActive". This gives a hint what should happen if the test method is executed.
Another approach is to use "Given[ExplainYourInput]When[WhatIsDone]Then[ExpectedResult]" for the display name of the test method.
If you are using the Maven build system, you should use the "Test" suffix for test classes. The Maven build system (via its surfire plug-in) automatically includes such classes in its test scope.
You can also run your JUnit tests outside our IDE via standard Java code. Build systems like Apache Maven or Gradle in combination with a Continuous Integration Server (like Jenkins) can be used to execute tests automatically on a regular basis.
The org.junit.runner.JUnitCore class provides the runClasses() method.
This method allows you to run one or several tests classes.
As a return parameter you receive an object of the type org.junit.runner.Result.
This object can be used to retrieve information about the tests.
The following class demonstrates how to run the MyClassTest.
This class executes your test class and write potential failures to the console.
package de.vogella.junit.first;
import org.junit.runner.JUnitCore;
import org.junit.runner.Result;
import org.junit.runner.notification.Failure;
public class MyTestRunner {
public static void main(String[] args) {
Result result = JUnitCore.runClasses(MyClassTest.class);
for (Failure failure : result.getFailures()) {
System.out.println(failure.toString());
}
}
}This class can be executed like any other Java program on the command line. You only need to add the JUnit library JAR file to the classpath.
JUnit assumes that all test methods can be executed in an arbitrary order. Well-written test code should not assume any order, i.e., tests should not depend on other tests.
As of JUnit 4.11 the default is to use a deterministic, but not predictable, order for the execution of the tests.
You can use an annotation to define that the test methods are sorted by method name, in lexicographic order.
To activate this feature, annotate your test class with the @FixMethodOrder(MethodSorters.NAME_ASCENDING) annotation.
You can also explicitely set the default by using the MethodSorters.DEFAULT parameter in this annotation.
You can also use MethodSorters.JVM which uses the JVM defaults, which may vary from run to run.
JUnit uses annotations to mark methods as test methods and to configure them. The following table gives an overview of the most important annotations in JUnit for the 4.x and 5.x versions. All these annotations can be used on methods.
| JUnit 4 | Description |
|---|---|
|
Import statement for using the following annotations. |
|
Identifies a method as a test method. |
|
Executed before each test. It is used to prepare the test environment (e.g., read input data, initialize the class). |
|
Executed after each test. It is used to cleanup the test environment (e.g., delete temporary data, restore defaults). It can also save memory by cleaning up expensive memory structures. |
|
Executed once, before the start of all tests.
It is used to perform time intensive activities, for example, to connect to a database. Methods marked with this annotation need to be defined as |
|
Executed once, after all tests have been finished.
It is used to perform clean-up activities, for example, to disconnect from a database. Methods annotated with this annotation need to be defined as |
|
Marks that the test should be disabled. This is useful when the underlying code has been changed and the test case has not yet been adapted. Or if the execution time of this test is too long to be included. It is best practice to provide the optional description, why the test is disabled. |
|
Fails if the method does not throw the named exception. |
|
Fails if the method takes longer than 100 milliseconds. |
JUnit provides static methods to test for certain conditions via the Assert class.
These assert statements typically start with assert.
They allow you to specify the error message, the expected and the actual result.
An assertion method compares the actual value returned by a test to the expected value.
It throws an AssertionException if the comparison fails.
The following table gives an overview of these methods. Parameters in [] brackets are optional and of type String.
| Statement | Description |
|---|---|
fail([message]) |
Let the method fail. Might be used to check that a certain part of the code is not reached or to have a failing test before the test code is implemented. The message parameter is optional. |
assertTrue([message,] boolean condition) |
Checks that the boolean condition is true. |
assertFalse([message,] boolean condition) |
Checks that the boolean condition is false. |
assertEquals([message,] expected, actual) |
Tests that two values are the same. Note: for arrays the reference is checked not the content of the arrays. |
assertEquals([message,] expected, actual, tolerance) |
Test that float or double values match. The tolerance is the number of decimals which must be the same. |
assertNull([message,] object) |
Checks that the object is null. |
assertNotNull([message,] object) |
Checks that the object is not null. |
assertSame([message,] expected, actual) |
Checks that both variables refer to the same object. |
assertNotSame([message,] expected, actual) |
Checks that both variables refer to different objects. |
If you have several test classes, you can combine them into a test suite. Running a test suite executes all test classes in that suite in the specified order. A test suite can also contain other test suites.
The following example code demonstrates the usage of a test suite.
It contains two test classes (MyClassTest and MySecondClassTest).
If you want to add another test class, you can add it to the @Suite.SuiteClasses statement.
package com.vogella.junit.first;
import org.junit.runner.RunWith;
import org.junit.runners.Suite;
import org.junit.runners.Suite.SuiteClasses;
@RunWith(Suite.class)
@SuiteClasses({
MyClassTest.class,
MySecondClassTest.class })
public class AllTests {
}The @Ignore annotation allow to statically ignore a test.
Alternatively you can use Assume.assumeFalse or Assume.assumeTrue to define a condition for the test.
Assume.assumeFalse marks the test as invalid, if its condition evaluates to true.
Assume.assumeTrue evaluates the test as invalid if its condition evaluates to false.
For example, the following disables a test on Linux:
Assume.assumeFalse(System.getProperty("os.name").contains("Linux"));JUnit allows you to use parameters in a tests class. This class can contain one test method and this method is executed with the different parameters provided.
You mark a test class as a parameterized test with the @RunWith(Parameterized.class) annotation.
Such a test class must contain a static method annotated with the @Parameters annotation.
That method generates and returns a collection of arrays.
Each item in this collection is used as parameter for the test method.
You can use the @Parameter annotation on public fields to get the test values injected in the test.
The following code shows an example for a parameterized test.
It tests the multiply() method of the MyClass class which is included as inner class for the purpose of this example.
package testing;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.junit.runners.Parameterized;
import org.junit.runners.Parameterized.Parameters;
import java.util.Arrays;
import java.util.Collection;
import static org.junit.Assert.assertEquals;
import static org.junit.runners.Parameterized.*;
@RunWith(Parameterized.class)
public class ParameterizedTestFields {
// fields used together with @Parameter must be public
@Parameter(0)
public int m1;
@Parameter(1)
public int m2;
@Parameter(2)
public int result;
// creates the test data
@Parameters
public static Collection<Object[]> data() {
Object[][] data = new Object[][] { { 1 , 2, 2 }, { 5, 3, 15 }, { 121, 4, 484 } };
return Arrays.asList(data);
}
@Test
public void testMultiplyException() {
MyClass tester = new MyClass();
assertEquals("Result", result, tester.multiply(m1, m2));
}
// class to be tested
class MyClass {
public int multiply(int i, int j) {
return i *j;
}
}
}Alternatively to using the @Parameter annotation you can use a constructor in which you store the values for each test.
The number of elements in each array
provided by
the
method annotated with
@Parameters
must
correspond to the number of parameters in the
constructor of the
class.
The class is created for each parameter and
the test
values are
passed
via the constructor to the class.
package de.vogella.junit.first;
import static org.junit.Assert.assertEquals;
import java.util.Arrays;
import java.util.Collection;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.junit.runners.Parameterized;
import org.junit.runners.Parameterized.Parameters;
@RunWith(Parameterized.class)
public class ParameterizedTestUsingConstructor {
private int m1;
private int m2;
public ParameterizedTestUsingConstructor(int p1, int p2) {
m1 = p1;
m2 = p2;
}
// creates the test data
@Parameters
public static Collection<Object[]> data() {
Object[][] data = new Object[][] { { 1 , 2 }, { 5, 3 }, { 121, 4 } };
return Arrays.asList(data);
}
@Test
public void testMultiplyException() {
MyClass tester = new MyClass();
assertEquals("Result", m1 * m2, tester.multiply(m1, m2));
}
// class to be tested
class MyClass {
public int multiply(int i, int j) {
return i *j;
}
}
}If you run this test class, the test method is executed with each defined parameter. In the above example the test method is executed three times.
A more flexible and easier to write approach is provided by the JUnitParams from https://github.com/Pragmatists/JUnitParams.
Via JUnit rules you can add behavior to each tests in a test class.
You can annotate fields of type TestRule with the @Rule annotation.
You can create objects which can be used and configured in your test methods.
This adds more flexibility to your tests.
You could, for example, specify which exception message you expect during the execution of your test code.
package de.vogella.junit.first;
import org.junit.Rule;
import org.junit.Test;
import org.junit.rules.ExpectedException;
public class RuleExceptionTesterExample {
@Rule
public ExpectedException exception = ExpectedException.none();
@Test
public void throwsIllegalArgumentExceptionIfIconIsNull() {
exception.expect(IllegalArgumentException.class);
exception.expectMessage("Negative value not allowed");
ClassToBeTested t = new ClassToBeTested();
t.methodToBeTest(-1);
}
}JUnit already provides several useful rule implementations.
For example, the TemporaryFolder class allows to setup files and folders which are automatically removed after each test run.
The following code shows an example for the usage of the TemporaryFolder implementation.
package de.vogella.junit.first;
import static org.junit.Assert.assertTrue;
import java.io.File;
import java.io.IOException;
import org.junit.Rule;
import org.junit.Test;
import org.junit.rules.TemporaryFolder;
public class RuleTester {
@Rule
public TemporaryFolder folder = new TemporaryFolder();
@Test
public void testUsingTempFolder() throws IOException {
File createdFolder = folder.newFolder("newfolder");
File createdFile = folder.newFile("myfilefile.txt");
assertTrue(createdFile.exists());
}
}For more examples of existing rules see https://github.com/junit-team/junit4/wiki/Rules.
To write your custom rule, you need to implement the TestRule interface.
This interface defines the apply(Statement, Description) method which must return an instance of Statement.
Statement represent the tests within the JUnit runtime and Statement#evaluate() run these.
Description describes the individual test.
It allows to read information about the test via reflection.
The following is a simple example for adding a log statement to an Android application before and after test execution.
package testing.android.vogella.com.asynctask;
import android.util.Log;
import org.junit.rules.TestRule;
import org.junit.runner.Description;
import org.junit.runners.model.Statement;
public class MyCustomRule implements TestRule {
private Statement base;
private Description description;
@Override
public Statement apply(Statement base, Description description) {
this.base = base;
this.description = description;
return new MyStatement(base);
}
public class MyStatement extends Statement {
private final Statement base;
public MyStatement(Statement base) {
this.base = base;
}
@Override
public void evaluate() throws Throwable {
System.
Log.w("MyCustomRule",description.getMethodName() + "Started" );
try {
base.evaluate();
} finally {
Log.w("MyCustomRule",description.getMethodName() + "Finished");
}
}
}
}To use this rule, simple add a field annotated with @Rule to your test class.
@Rule
public MyCustomRule myRule = new MyCustomRule();It is possible to define categories of tests and include or exclude them based on annotations. The following example is based on the JUnit 4.8 release notes.
public interface FastTests { /* category marker */
}
public interface SlowTests { /* category marker */
}
public class A {
@Test
public void a() {
fail();
}
@Category(SlowTests.class)
@Test
public void b() {
}
}
@Category({ SlowTests.class, FastTests.class })
public class B {
@Test
public void c() {
}
}
@RunWith(Categories.class)
@IncludeCategory(SlowTests.class)
@SuiteClasses({ A.class, B.class })
// Note that Categories is a kind of Suite
public class SlowTestSuite {
// Will run A.b and B.c, but not A.a
}
@RunWith(Categories.class)
@IncludeCategory(SlowTests.class)
@ExcludeCategory(FastTests.class)
@SuiteClasses({ A.class, B.class })
// Note that Categories is a kind of Suite
public class SlowTestSuite {
// Will run A.b, but not A.a or B.c
}You can write the JUnit tests manually, but Eclipse supports the creation of JUnit tests via wizards.
For example, to create a JUnit test or a test class for an existing class. Right-click on your new class, select this class in the Package Explorer_ view, right-click on it and select .
Alternatively you can also use the JUnit wizards available under .
The Eclipse IDE also provides support for executing your tests interactively.
To run a test, select the test class, right-click on it and select .
This starts JUnit and executes all test methods in this class.
Eclipse provides the Alt+Shift+X, T shortcut to run the test in the selected class.
To run only the selected test, position the cursor on the test method name and use the shortcut.
To see the result of a JUnit test, Eclipse uses the JUnit view which shows the results of the tests. You can also select individual unit tests in this view, right-click on them and select Run to execute them again.
By default, this view shows all tests. You can also configure, that it only shows failing tests.
You can also define that the view is only activated if you have a failing test.
NOTE:Eclipse creates run configurations for tests. You can see and modify these via the menu.
To get the list of failed test, right click on the test result and select Copy Failure List. This copies the failed tests and there stack traces into the clipboard.
Static import is a feature that allows fields and methods defined in a class as public static to be used without specifying the class in which the field is defined.
JUnit assert statements are typically defined as public static to allow the developer to write short test statements.
The following snippet demonstrates an assert statement with and without static imports.
// without static imports you have to write the following statement
Assert.assertEquals("10 x 5 must be 50", 50, tester.multiply(10, 5));
// alternatively define assertEquals as static import
import static org.junit.Assert.assertEquals;
// more code
// use assertEquals directly because of the static import
assertEquals("10 x 5 must be 50", 50, tester.multiply(10, 5));You can create a test suite via Eclipse. For this, select the test classes which should be included in suite in the Package Explorer view, right-click on them and select .
The @Test (expected = Exception.class) annotation is limited as it can only test for one exception.
To testexceptions, you can use the following testpattern.
try {
mustThrowException();
fail();
} catch (Exception e) {
// expected
// could also check for message of exception, etc.
}JUnit Plug-in tests are used to write unit tests for your plug-ins. These tests are executed by a special test runner that launches another Eclipse instance in a separate VM. The test methods are executed within that instance.
To use JUnit in your Gradle build, add a testCompile dependency to your build file.
apply plugin: 'java'
dependencies {
testCompile 'junit:junit:4.12'
}To use JUnit in your Maven build, add the following dependency to your pom file.
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>4.12</version>
</dependency>The Eclipse IDE ships with a version of JUnit.
It is also possible to download the JUnit library explicitly from the JUnit website. Add this library to your classpath, to use it.
The Eclipse IDE cannot always create the corresponding static import statements automatically.
You can configure the Eclipse IDE to use code completion to insert typical JUnit method calls and to add the static import automatically. For this open the Preferences via and select .
Use the New Type button to add the following entries to it:
org.junit.Assert
org.hamcrest.CoreMatchers
org.hamcrest.Matchers
This makes, for example, the assertTrue, assertFalse and assertEquals methods directly available in the Content Assists.
You can now use Content Assists (shortcut: Ctrl+Space) to add the method and the import.
Create a new project called com.vogella.junit.first. Create a new source folder test. For this right-click on your project, select Properties and choose . Select the Source tab.
Press the Add Folder button. Afterwards, press the Create New Folder button. Enter test as folder name.
The result is depicted in the following screenshot.
NOTE:You can also add a new source folder by right-clicking on a project and selecting .
In the src folder, create the com.vogella.junit.first package and the following class.
package com.vogella.junit.first;
public class MyClass {
public int multiply(int x, int y) {
// the following is just an example
if (x > 999) {
throw new IllegalArgumentException("X should be less than 1000");
}
return x / y;
}
}Right-click on your new class in the Package Explorer view and select .
In the following wizard ensure that the New JUnit 4 test flag is selected and set the source folder to test, so that your test class gets created in this folder.
Press the Next button and select the methods that you want to test.
If the JUnit library is not part of the classpath of your project, Eclipse will prompt you to add it. Use this to add JUnit to your project.
Create a test with the following code.
package com.vogella.junit.first;
import static org.junit.Assert.assertEquals;
import org.junit.AfterClass;
import org.junit.BeforeClass;
import org.junit.Test;
public class MyClassTest {
@Test(expected = IllegalArgumentException.class)
public void testExceptionIsThrown() {
MyClass tester = new MyClass();
tester.multiply(1000, 5);
}
@Test
public void testMultiply() {
MyClass tester = new MyClass();
assertEquals("10 x 5 must be 50", 50, tester.multiply(10, 5));
}
}Right-click on your new test class and select .
The result of the tests are displayed in the JUnit view. In our example one test should be successful and one test should show an error. This error is indicated by a red bar.
The test is failing, because our multiplier class is currently not working correctly. It does a division instead of multiplication. Fix the bug and re-run the test to get a green bar.
Unit testing also makes use of object mocking. In this case the real object is exchanged by a replacement which has a predefined behavior for the test.
There are several frameworks available for mocking. To learn more about mock frameworks please see the Mockito tutorial.
JUnit 5 is the latest major release of JUnit.
JUnit 5 consists of a number of discrete components:
JUnit Platform - foundation layer which enables different testing frameworks to be launched on the JVM
Junit Jupiter - is the JUnit 5 test framework which is launched by JUnit Platform
JUnit Vintage - legacy TestEngine which runs older tests
buildscript {
repositories {
mavenCentral()
// The following is only necessary if you want to use SNAPSHOT releases.
// maven { url 'https://oss.sonatype.org/content/repositories/snapshots' }
}
dependencies {
classpath 'org.junit.platform:junit-platform-gradle-plugin:1.0.0'
}
}
repositories {
mavenCentral()
}
apply plugin: 'java'
apply plugin: 'eclipse'
apply plugin: 'org.junit.platform.gradle.plugin'
dependencies {
testImplementation("org.junit.jupiter:junit-jupiter-api:5.0.0")
testRuntime("org.junit.jupiter:junit-jupiter-engine:5.0.0")
// to run JUnit 3/4 tests:
testImplementation("junit:junit:4.12")
testRuntime("org.junit.vintage:junit-vintage-engine:4.12.0")
}You can find the official gradle.build example here: https://github.com/junit-team/junit5-samples/blob/master/junit5-gradle-consumer/build.gradle
After letting gradle set up your project can then execute your JUnit 5 tests through the terminal:
gradle junitPlatformTestIf you are using Eclipse it is best to install the Buildship tooling.
Then you can start your tests via .
The result of the test execution will be displayed in the Console view.
This example shows how to import all components of JUnit 5 into your project.
We need to register the individual components with Maven surefire:
<build>
<plugins>
<plugin>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.1</version>
<configuration>
<source>${java.version}</source>
<target>${java.version}</target>
</configuration>
</plugin>
<plugin>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.19.1</version>
<configuration>
<includes>
<include>**/Test*.java</include>
<include>**/*Test.java</include>
<include>**/*Tests.java</include>
<include>**/*TestCase.java</include>
</includes>
<properties>
<!-- <includeTags>fast</includeTags> -->
<excludeTags>slow</excludeTags>
</properties>
</configuration>
<dependencies>
<dependency>
<groupId>org.junit.platform</groupId>
<artifactId>junit-platform-surefire-provider</artifactId>
<version>${junit.platform.version}</version>
</dependency>
<dependency>
<groupId>org.junit.jupiter</groupId>
<artifactId>junit-jupiter-engine</artifactId>
<version>${junit.jupiter.version}</version>
</dependency>
<dependency>
<groupId>org.junit.vintage</groupId>
<artifactId>junit-vintage-engine</artifactId>
<version>${junit.vintage.version}</version>
</dependency>
</dependencies>
</plugin>
</plugins>
</build>And add the dependencies:
<dependencies>
<dependency>
<groupId>org.junit.jupiter</groupId>
<artifactId>junit-jupiter-api</artifactId>
<version>${junit.jupiter.version}</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>${junit.version}</version>
<scope>test</scope>
</dependency>
</dependencies>You can find a complete example of a working maven configuration here: https://github.com/junit-team/junit5-samples/blob/r5.0.0-M4/junit5-maven-consumer/pom.xml
|
The above works for Java projects but not yet for Android projects. |
JUnit uses annotations to mark methods as test methods and to configure them. The following table gives an overview of the most important annotations in JUnit for the 4.x and 5.x versions. All these annotations can be used on methods.
import org.junit.jupiter.api.* |
Import statement for using the following annotations. |
|---|---|
|
Identifies a method as a test method. |
|
Repeats the test a <Number> of times |
|
Method is a Factory for dynamic tests |
|
Executed before each test. It is used to prepare the test environment (e.g., read input data, initialize the class). |
|
Executed after each test. It is used to cleanup the test environment (e.g., delete temporary data, restore defaults). It can also save memory by cleaning up expensive memory structures. |
|
Executed once, before the start of all tests.
It is used to perform time intensive activities, for example, to connect to a database. Methods marked with this annotation need to be defined as |
|
Executed once, after all tests have been finished.
It is used to perform clean-up activities, for example, to disconnect from a database. Methods annotated with this annotation need to be defined as |
|
Lets you nest inner test classes to force a certain execution order |
|
Tests in JUnit 5 can be filtered by tag. Eg., run only tests tagged with "fast". |
|
Lets you register an Extension class that integrates with one or more extension points |
|
Marks that the test should be disabled. This is useful when the underlying code has been changed and the test case has not yet been adapted. Or if the execution time of this test is too long to be included. It is best practice to provide the optional description, why the test is disabled. |
|
<Name> that will be displayed by the test runner. In contrast to method names the DisplayName can contain spaces. |
The @Disabled annotation allows to statically ignore a test.
Alternatively you can use Assumptions.assumeFalse or Assumptions.assumeTrue to define a condition for test deactivation.
Assumptions.assumeFalse marks the test as invalid, if its condition evaluates to true.
Assumptions.assumeTrue evaluates the test as invalid if its condition evaluates to false.
For example, the following disables a test on Linux:
Assumptions.assumeFalse(System.getProperty("os.name").contains("Linux"));To run multiple tests together, you can use test suites. They allow to aggregate multiple test classes. JUnit 5 provides two annotations:
@SelectPackages - used to specify the names of packages for the test suite
@SelectClasses - used to specify the classes for the test suite. They can be located in different packages.
@RunWith(JUnitPlatform.class)
@SelectPackages("com.vogella.junit5.examples")
public class AllTests {}@RunWith(JUnitPlatform.class)
@SelectClasses({AssertionTest.class, AssumptionTest.class, ExceptionTest.class})
public class AllTests {}Exception is handling with org.junit.jupiter.api.Assertions.expectThrows().
You define the expected Exception class and provide code that should throw the exception.
import static org.junit.jupiter.api.Assertions.expectThrows;
@Test
void exceptionTesting() {
// set up user
Throwable exception = expectThrows(IllegalArgumentException.class, () -> user.setAge("23"));
assertEquals("Age must be an Integer.", exception.getMessage());
}This lets you define which part of the test should throw the exception. The test will still fail if an exception is thrown outside of this scope.
@Test
void groupedAssertions() {
Address address = new Address();
// In a grouped assertion all assertions are executed, even after a failure.
// The error messages get grouped together.
assertAll("address name",
() -> assertEquals("John", address.getFirstName()),
() -> assertEquals("User", address.getLastName())
);
}
=> org.opentest4j.MultipleFailuresError: address name (2 failures)
expected: <John> but was: <null>
expected: <User> but was: <null>If you want to ensure that a test fails if it isn’t done in a certain amount of time you can use the assertTimeout() method.
This method will wait until
import static org.junit.jupiter.api.Assertions.assertTimeout;
import static java.time.Duration.ofSeconds;
import static java.time.Duration.ofMinutes;
@Test
void timeoutNotExceeded() {
assertTimeout(ofMinutes(1), () -> service.doBackup());
}
// if you have to check a return value
@Test
void timeoutNotExceededWithResult() {
String actualResult = assertTimeout(ofSeconds(1), () -> {
return restService.request(request);
});
assertEquals(200, request.getStatus());
}
=> org.opentest4j.AssertionFailedError: execution exceeded timeout of 1000 ms by 212 msIf you want your tests to cancel after the timeout period is passed you can use the assertTimeoutPreemptively() method.
@Test
void timeoutNotExceededWithResult() {
String actualResult = assertTimeoutPreemptively(ofSeconds(1), () -> {
return restService.request(request);
});
assertEquals(200, request.getStatus());
}
=> org.opentest4j.AssertionFailedError: execution timed out after 1000 msSometimes we want to be able to run the same test on a data set. Holding the data set in a Collection and iterating over it with the assertion in the loop body has the problem that the first assertion failure will stop the test execution. JUnit 5 offers multiple ways to overcome this limitation.
JUnit 5 offers the possibility to define dynamic tests.
We can use this to rewrite our example.
Dynamic test methods are annotated with @TestFactory and can return an Iterable, a Collection or a Stream of DynamicTests.
JUnit then runs every DynamicTest when the test is executed.
@BeforeEach and @AfterEach methods will not be called for dynamic tests.
This means that you can’t use them to reset the test object if you change it’s state in the lambda expression for a dynamic test.
In this example we return a Stream:
import static org.junit.jupiter.api.Assertions.*;
import static org.junit.jupiter.api.DynamicTest.dynamicTest;
import java.util.Arrays;
import java.util.stream.Stream;
import org.junit.jupiter.api.DynamicTest;
import org.junit.jupiter.api.TestFactory;
public class DynamicTestCreationTest {
@TestFactory
public Stream<DynamicTest> testMultiplyException() {
MyClass tester = new MyClass();
int[][] data = new int[][] { { 1, 2, 2 }, { 5, 3, 15 }, { 121, 4, 484 } };
return Arrays.stream(data).map(entry -> {
int m1 = entry[0];
int m2 = entry[1];
int expected = entry[2];
return dynamicTest(m1 + " * " + m2 + " = " + expected, () -> {
assertEquals(expected, tester.multiply(m1, m2));
});
});
}
// class to be tested
class MyClass {
public int multiply(int i, int j) {
return i * j;
}
}
}Junit5 also supports parameterized tests.
To use them you have to add the junit-jupiter-params package as a test dependencies.
If you are using gradle:
dependencies {
// ..
testCompile group: 'org.junit.jupiter', name: 'junit-jupiter-params', version: '5.0.0'
}For this example we use the @MethodSource annotation.
We give it the name of the function(s) we want it to call to get it’s test data.
The function has to be static and must return either a Collection, an Iterator, a Stream or an Array.
On execution the test method gets called once for every entry in the data source.
In contrast to Dynamic Tests @BeforeEach and @AfterEach methods will be called for parameterized tests.
import static org.junit.jupiter.api.Assertions.*;
import org.junit.jupiter.params.ParameterizedTest;
import org.junit.jupiter.params.provider.MethodSource;
public class DynamicTestCreationTest {
public static int[][] data() {
return new int[][] { { 1 , 2, 2 }, { 5, 3, 15 }, { 121, 4, 484 } };
}
@ParameterizedTest
@MethodSource(names = "data")
void testWithStringParameter(int[] data) {
MyClass tester = new MyClass();
int m1 = data[0];
int m2 = data[1];
int expected = data[2];
assertEquals(expected, tester.multiply(m1, m2));
}
// class to be tested
class MyClass {
public int multiply(int i, int j) {
return i * j;
}
}
}The following table gives an overview of all possible test data sources for parameterized tests.
| Annotation | Description |
|---|---|
|
Lets you define an array of test values.
Permissible types are |
|
Lets you pass Enum constants as test class.
With the optional attribute |
|
The result of the named method is passed as argument to the test. |
|
Expects strings to be parsed as Csv. The delimiter is |
|
Specifies a class that provides the test data.
The referenced class has to implement the |
JUnit tries to automatically convert the source strings to match the expected arguments of the test method.
If you need explicit conversion you can specify a converter with the @ConvertWith annotation.
To define your own converter you have to implement the ArgumentConverter interface.
In the following example we use the abstract SimpleArgumentConverter base class.
@ParameterizedTest
@ValueSource(ints = {1, 12, 42})
void testWithExplicitArgumentConversion(@ConvertWith(ToOctalStringArgumentConverter.class) String argument) {
System.err.println(argument);
assertNotNull(argument);
}
static class ToOctalStringArgumentConverter extends SimpleArgumentConverter {
@Override
protected Object convert(Object source, Class<?> targetType) {
assertEquals(Integer.class, source.getClass(), "Can only convert from Integers.");
assertEquals(String.class, targetType, "Can only convert to String");
return Integer.toOctalString((Integer) source);
}
}| JUnit 5 | JUnit 4 | Description |
|---|---|---|
|
|
Import statement for using the following annotations. |
|
|
Identifies a method as a test method. |
|
|
Executed before each test. It is used to prepare the test environment (e.g., read input data, initialize the class). |
|
|
Executed after each test. It is used to cleanup the test environment (e.g., delete temporary data, restore defaults). It can also save memory by cleaning up expensive memory structures. |
|
|
Executed once, before the start of all tests.
It is used to perform time intensive activities, for example, to connect to a database. Methods marked with this annotation need to be defined as |
|
|
Executed once, after all tests have been finished.
It is used to perform clean-up activities, for example, to disconnect from a database. Methods annotated with this annotation need to be defined as |
|
|
Marks that the test should be disabled. This is useful when the underlying code has been changed and the test case has not yet been adapted. Or if the execution time of this test is too long to be included. It is best practice to provide the optional description, why the test is disabled. |
Not available, is replaced by |
|
Fails if the method does not throw the named exception. |
Not available, is replaced by |
|
Fails if the method takes longer than 100 milliseconds. |